Professional Bathtub Refinishing in Seattle & Tacoma
Stained, chipped, or outdated? Your bathtub doesn’t need replacing. It needs resurfacing. Done in 1-2 days, 60-70% less than a new tub.
Licensed & Insured in Washington State | Free Estimates | 1-Year Warranty | (425) 998-6135
What Is Bathtub Refinishing?
Pricing
Bathtub refinishing pricing depends on tub size, condition, and material type:
| Project Type | Staringt At | Timeline |
|---|---|---|
| Standard bathtub | $450 | 1 Day |
| Oversized/Garden Tub | $550-$650 | 1-2 Days |
| Clawfoot/Specialty Tub | $600-$800 | 1-2 Days |
| Tub + Surrounding Tile | $750-$1,000 | 1-2 Days |
Includes surface prep, chip repair, coating application, and cleanup. Cure time is 24-48 hours before use. Free estimates with firm pricing — no surprises.
Bathtub Refinishing vs. Replacement: Cost Comparison
- Replacing a bathtub in Seattle costs $1,500-$5,000+ when you factor in the tub itself, plumbing modifications, tile work, and labor. It takes 3-7 days and requires a plumber, tile installer, and potentially a general contractor.
- Refinishing costs $450-$800, takes 1-2 days, requires zero plumbing work, and produces a result that’s visually indistinguishable from a new tub. The coating lasts 10-15 years with normal use.
- The only scenario where replacement makes more sense is if your tub has structural cracks, severe rust-through, or you want to change the tub’s size or configuration. For cosmetic restoration, refinishing wins every time.
Expand to learn about our 4 Step Bathtub Refinishing Process…
1. Surface Preparation. We clean the tub thoroughly, remove old caulk, and repair chips or cracks. Surrounding areas are masked and protected.
2. Acid Etch & Bond Coat. The surface is etched to create proper adhesion, then a bonding agent is applied. This is the step that separates professional results from DIY failures.
3. Coating Application. Multiple coats of professional-grade finish are sprayed in a controlled environment. Our coatings are significantly more durable than hardware-store products.
4. Cure & Inspect. The tub cures for 24-48 hours. We return to inspect the finish, apply fresh caulk, and ensure everything meets our standards.
Why Choose Kinberg Restoration for Bathtub Refinishing
- Done in 1-2 Days. Most bathtubs are refinished in a single day. Cure time is 24-48 hours. Compare that to 3-7 days for replacement.
- Save 60-70% vs. Replacement. A $450 refinishing replaces a $2,000-$5,000 replacement project. The math is straightforward.
- Professional-Grade Coatings. Our coatings are rated for 10-15 year lifespans. They’re not the same products sold at hardware stores. Professional application makes the difference.
- 1-Year Workmanship Warranty. Every refinishing project backed by our warranty. If the finish isn’t right, we make it right.
- Low-VOC, Safe Products. We use low-VOC formulations and set up proper ventilation for every project. Safe for homes with kids and pets.
Frequently Asked Questions
Find answers to common questions about our resurfacing services.
How much does bathtub refinishing cost in Seattle?
Bathtub refinishing in Seattle starts at $450 for a standard tub. Oversized, clawfoot, or specialty tubs range from $550-$800. Combination tub-and-tile projects run $750-$1,000. We provide free estimates with firm pricing.
How long does bathtub refinishing last?
Professional bathtub refinishing with quality coatings typically lasts 10-15 years with proper care. Avoid abrasive cleaners, use non-slip mats instead of adhesive strips, and clean with mild soap. Our coatings significantly outlast DIY refinishing kits.
Is bathtub refinishing safe? What about fumes?
We use professional-grade, low-VOC coatings and set up proper ventilation during every project. There is some odor during application, but it dissipates within a few hours. The cured finish is completely safe and inert. We’ll walk you through any temporary precautions before starting.
Can you refinish a bathtub with chips or cracks?
Yes. Minor chips and cracks are repaired as part of our standard refinishing process. The repair is filled, sanded smooth, and coated over — invisible in the final result. Severe structural damage may require replacement, which we’ll identify during your free assessment.
How soon can I use my bathtub after refinishing?
The refinished surface needs 24-48 hours of cure time before water exposure. We’ll give you specific timing based on the coatings used and conditions in your bathroom.
What types of bathtubs can you refinish?
We refinish porcelain, acrylic, fiberglass, and cast iron bathtubs. Standard tubs, garden tubs, clawfoot tubs, and walk-in tubs. If you have a tub, we can almost certainly refinish it.
We Serve the Greater Seattle-Tacoma Area
Kinberg Restoration provides cabinet refinishing throughout Washington State, including:
Seattle, Tacoma, Bellevue, Olympia, Renton, Kent, Federal Way, Auburn, Lakewood, Everett, Kirkland, Redmond, Issaquah, Puyallup, Gig Harbor, and surrounding communities.